Nickel Base Alloy - Inconel 625

PDF Print E-mail

 

Allow us to be your custom manufacturer utilizing Inconel 625 material

Spring Works Utah specializes in the custom manufacture of springs, wire forms, and stampings using Inconel 625 Nickel Alloy material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide.
 
We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price.
 

Inconel 625 Springs

 

Order Information

If you would like FREE design assistance, (RFQ) request for quote, or would like to speak with one of our representatives more about your Inconel 625 Nickel Alloy material project, please Contact Us.
 
Ph: 801.298.0113
Fx: 801.292.8006
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
 
To learn more about Inconel 625 Nickel Alloy material and its Relative Strength, Fatigue Properties, Rockwell Hardness, Minimum / Maximum Size, Maximum Operating Temperature, Electrical Conductivity, Density, and Typical Surface Quality, please see below.
 
 
 
Material Inconel 625    
Material Group Nickel Base Alloy    
           
Description Please call for more information.  
   
           
Cross Reference ASTM B446  
  UNS N06625  
  SAE/AISI -  
  AMS -  
  SAE -  
  MIL. SP -  
  FED -  
  JIS -  
  DIN -  
  BS -  
           
Relative Strength -   °F Stress Relieve -  
Fatigue Applications -   °C Stress Relieve -  
           
Rockwell Hardness -   Typical heat treatment / stress relieve after forming  
           
Min Size (in) 0.012   Sizes commonly available for wire or strip. Special sizes may be available at additional cost.  
Max Size (in) 0.175    
Min Size (mm) 0.304    
Max Size (mm) 4.440    
           
Max Temp °F -   Maximum service temperature. May vary due to operating stress and allowable relaxation.  
Max Temp °C -    
           
(E) Mpa -   Young's Modulus  
(E) psi 29,000,000    
           
(G) Mpa -   Modulus of Rigidity  
(G) psi 11,000,000    
           
Density g/cm3
-      
Density lb/in3
-    
           
Conductivity -   % IACS (International Annealed Copper Standard)  
Typical Surface -      
           
           
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.  
 
 
Inconel 625 Spring Products:
 
Inconel 625 Coil Springs
Inconel 625 Wire Springs 
Inconel 625 Compression Springs
Inconel 625 Extension Springs
Inconel 625 Torsion Springs
Inconel 625 Conical Springs
Inconel 625 Tapered Springs
Inconel 625 Barrel Springs
Inconel 625 Hourglass Springs 
Inconel 625 Die Springs
Inconel 625 Spiral Springs
Inconel 625 Power Springs
Inconel 625 Garter Springs
Inconel 625 Wave Springs
Inconel 625 Retaining Springs
Inconel 625 Belleville Springs
Inconel 625 Heavy Duty Springs
Inconel 625 Hot Wound Springs 
Inconel 625 Volute Springs
Inconel 625 Drawbar Springs 
 
Inconel 625 Wire Form Products:
 
Inconel 625 Wire Forms
Inconel 625 Wire Forming
Inconel 625 Wire Bending
Inconel 625 Wire Rings
Inconel 625 Wire Racks
Inconel 625 Wire Displays
Inconel 625 Wire Art
 
Inconel 625 Stamping Products:
 
Inconel 625 Flat Springs
Inconel 625 Spring Clips
Inconel 625 Electrical Contacts
Inconel 625 Battery Contacts
Inconel 625 Fourslides
Inconel 625 Multislides
Inconel 625 Laser Cutting