Tungsten
Tungsten Bar
Spring Works Utah specializes in the custom manufacture of wire springs, flat springs, and wire products using H-12 Tungsten Tungsten Bar material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide. We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price.
Choosing the Right Springs Manufacturer Matters!
Put Us To Work For You!
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Tungsten Bar Tungsten |
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | Key Features | Chemical Composition | ||||||||||||||||||||||||
| AMS 5688 ASTM A313 ASTM A580 BS 970 BS 2056 |
Good mechanical properties and corrosion resistance. |
|
||||||||||||||||||||||||
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Tungsten Bar Tungsten |
||
| Maximum Temperature | 500°F | 260°C |
| Melting Point | 2590°F | 1420°C |
| Minimum Size | 0.005 in | 0.130 mm |
| Maximum Size | 0.375 in | 9.500 mm |
| Modulus of Elasticity | 27195 ksi | 187.5 kN/mm² |
| Modulus of Rigidity | 10196 ksi | 70.3 kN/mm² |
| Density | 0.286 lb/in3 | 7.920 g/cm3 |
| Relative Strength | Medium | |
| Fatigue Applications | Good | |
| Rockwell Hardness | C35-45 | |
| Conductivity | 2 | |
| Typical Surface | B | |
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Tungsten Bar Tungsten |
|||
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | A | Maximum defect depth: 0 to 0.5% of d or t |
| B | Maximum defect depth: 1.0% of d or t | ||
| C | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.
*Mobile: To view complete table - scroll horizontally
H-12 Tungsten Wire Springs |
H-12 Tungsten Flat Springs
|
H-12 Tungsten Wire Products
|
|
H-12 Tungsten Compression Springs
H-12 Tungsten Extension Springs
H-12 Tungsten Torsion Springs
H-12 Tungsten Double Torsion Springs
H-12 Tungsten Conical Springs
H-12 Tungsten Tapered Springs
H-12 Tungsten Barrel Springs
H-12 Tungsten Hourglass Springs
H-12 Tungsten Die Springs
H-12 Tungsten Garter Springs
H-12 Tungsten Magazine Springs
H-12 Tungsten Miniature Springs
H-12 Tungsten Heavy Duty Springs
H-12 Tungsten Hot Wound Springs
H-12 Tungsten Cable Springs
H-12 Tungsten Wave Springs
H-12 Tungsten Coil SpringsH-12 Tungsten Valve Springs
H-12 Tungsten Micro Springs
H-12 Tungsten Helical Springs
H-12 Tungsten Mechanical Springs
|
H-12 Tungsten Spring Clips
H-12 Tungsten Constant Force Springs
H-12 Tungsten Spiral Springs
H-12 Tungsten Power Springs
H-12 Tungsten Wave Washers
H-12 Tungsten Curved Washers
H-12 Tungsten Belleville Washers
H-12 Tungsten Retaining Rings
H-12 Tungsten Variable Force Springs
H-12 Tungsten Constant Torque Springs
H-12 Tungsten Volute Springs
H-12 Tungsten Bow Springs
H-12 Tungsten Electrical Contacts
H-12 Tungsten Battery Contacts
H-12 Tungsten Fourslides Stampings
H-12 Tungsten Clock Springs
|
H-12 Tungsten Wire Forms
H-12 Tungsten Wire Bending
H-12 Tungsten Wire Rings
H-12 Tungsten Wire Forming
H-12 Tungsten Wire Products
H-12 Tungsten S-Hooks |
Tungsten Bar Tungsten