Oil Tempered
Carbon Steel Wire
Spring Works Utah specializes in the custom manufacture of wire springs, flat springs, and wire products using Oil Tempered Carbon Steel Wire material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide. We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price.
Choosing the Right Springs Manufacturer Matters!
Put Us To Work For You!
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Oil Tempered |
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | Key Features | Chemical Composition | ||||||||||||||||||||||||
| AMS 5688 ASTM A313 ASTM A580 BS 970 BS 2056 |
Good mechanical properties and corrosion resistance. |
|
||||||||||||||||||||||||
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Oil Tempered |
||
| Maximum Temperature | 500°F | 260°C |
| Melting Point | 2590°F | 1420°C |
| Minimum Size | 0.005 in | 0.130 mm |
| Maximum Size | 0.375 in | 9.500 mm |
| Modulus of Elasticity | 27195 ksi | 187.5 kN/mm² |
| Modulus of Rigidity | 10196 ksi | 70.3 kN/mm² |
| Density | 0.286 lb/in3 | 7.920 g/cm3 |
| Relative Strength | Medium | |
| Fatigue Applications | Good | |
| Rockwell Hardness | C35-45 | |
| Conductivity | 2 | |
| Typical Surface | B | |
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Oil Tempered |
|||
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | A | Maximum defect depth: 0 to 0.5% of d or t |
| B | Maximum defect depth: 1.0% of d or t | ||
| C | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.
*Mobile: To view complete table - scroll horizontally
Oil Tempered Wire Springs |
Oil Tempered Flat Springs
|
Oil Tempered Wire Products
|
|
Oil Tempered Compression Springs
Oil Tempered Extension Springs
Oil Tempered Torsion Springs
Oil Tempered Double Torsion Springs
Oil Tempered Conical Springs
Oil Tempered Tapered Springs
Oil Tempered Barrel Springs
Oil Tempered Hourglass Springs
Oil Tempered Die Springs
Oil Tempered Garter Springs
Oil Tempered Magazine Springs
Oil Tempered Miniature Springs
Oil Tempered Heavy Duty Springs
Oil Tempered Hot Wound Springs
Oil Tempered Cable Springs
Oil Tempered Wave Springs
Oil Tempered Coil SpringsOil Tempered Valve Springs
Oil Tempered Micro Springs
Oil Tempered Helical Springs
Oil Tempered Mechanical Springs
|
Oil Tempered Spring Clips
Oil Tempered Constant Force Springs
Oil Tempered Spiral Springs
Oil Tempered Power Springs
Oil Tempered Wave Washers
Oil Tempered Curved Washers
Oil Tempered Belleville Washers
Oil Tempered Retaining Rings
Oil Tempered Variable Force Springs
Oil Tempered Constant Torque Springs
Oil Tempered Volute Springs
Oil Tempered Bow Springs
Oil Tempered Electrical Contacts
Oil Tempered Battery Contacts
Oil Tempered Fourslides Stampings
Oil Tempered Clock Springs
|
Oil Tempered Wire Forms
Oil Tempered Wire Bending
Oil Tempered Wire Rings
Oil Tempered Wire Forming
Oil Tempered Wire Products
Oil Tempered S-Hooks |
Carbon Steel Wire Oil Tempered